Skip to content
Teach InternationalRTO 31165 · Est. 2005
Certificate IV · CPC40920

Certificate IV in Plumbing and Services

Advance toward licensing across the plumbing trade.

Overview

A higher-level qualification spanning water, sanitary, drainage, gas, roofing, and mechanical services — commonly used as a step toward plumbing licensing. Enquire about requirements in your state.

Delivered and assessed by Teach International (RTO 31165), a nationally regulated Registered Training Organisation since 2005.

Who it's for

Experienced plumbers moving toward contractor and licence level.

Units of competency & packaging rules

To achieve this qualification, competency must be demonstrated in:

  • 15 units of competency
  • 10 core units
  • 5 elective units

Stream offered: Operations

10 core units of competency
  • BSBESB402Establish legal and risk management requirements of new business ventures
  • CPCCBC4012Read and interpret plans and specifications
  • CPCPCM4011Carry out work-based risk control processes
  • CPCPCM4012Estimate and cost work
  • CPCPCM4015Access and interpret regulatory requirements for the plumbing and services industry
  • CPCPDR4011Design and size sanitary drainage systems
  • CPCPDR4012Design and size stormwater drainage systems
  • CPCPGS4011Design and size consumer gas installations
  • CPCPSN4011Design and size sanitary plumbing systems
  • CPCPWT4011Design and size heated and cold-water services and systems
5 elective units of competency
  • CPCPDR4013Design and size domestic treatment plant disposal systems
  • BSBESB403Plan finances for new business ventures
  • CPCPCM2043Carry out WHS requirements
  • CPCPGS3053Disconnect and reconnect Type A gas appliances
  • CPCPGS4022Service Type A gas appliances
Full training package rules and all permitted electives

Training package rules

  • To be awarded this qualification, competency must be achieved in:
  • 15 units of competency:
  • 10 core units
  • 5 elective units.
  • For the award of the CPC40920 Certificate IV in Plumbing and Services (Hydraulic services design) electives are to be selected as follows:
  • 15 units of competency:
  • 10 core units
  • 5 elective units from Group A
  • 2 units may be replaced by units from other Training Packages or nationally accredited courses at Certificate IV level and above, provided they do not duplicate the outcome of another unit chosen for the qualification.
  • Electives cannot be selected from Group B.
  • For the award of the CPC40920 Certificate IV in Plumbing and Services (Operations) electives are to be completed as follows:
  • 15 units of competency:
  • 10 core units
  • at least 1 elective from Group B
  • the remaining 4 elective units from Group A or Group B
  • 2 units may be replaced by units from other Training Packages or nationally accredited courses at Certificate IV level and above, provided they do not duplicate the outcome of another unit chosen for the qualification.
  • The elective units must ensure the integrity of the AQF alignment and contribute to a valid, industry-supported vocational outcome.
Core units(10 units)
  • BSBESB402Establish legal and risk management requirements of new business ventures
  • CPCCBC4012Read and interpret plans and specifications
  • CPCPCM4011Carry out work-based risk control processes
  • CPCPCM4012Estimate and cost work
  • CPCPCM4015Access and interpret regulatory requirements for the plumbing and services industry
  • CPCPDR4011Design and size sanitary drainage systems
  • CPCPDR4012Design and size stormwater drainage systems
  • CPCPGS4011Design and size consumer gas installations
  • CPCPSN4011Design and size sanitary plumbing systems
  • CPCPWT4011Design and size heated and cold-water services and systems
Group A(11 units)
  • BSBESB403Plan finances for new business ventures
  • CPCCBC4002Manage work health and safety in the building and construction workplace
  • CPCCBC4019Apply sustainable building design principles to water management systems
  • CPCCBC4024Resolve business disputes
  • CPCPCM4013Produce 2-D architectural drawings using design software
  • CPCPDR4013Design and size domestic treatment plant disposal systems
  • CPCPPS5033Design vacuum sewerage systems
  • CPCPFS4024Design residential fire sprinkler systems
  • CPCPMS4011Design, size and lay out heating and cooling systems
  • CPCPMS4023Design compressed air systems
  • CPCPRF4011Design and size roof drainage systems
Group B(13 units)
  • CPCPCM2043Carry out WHS requirements
  • CPCPDR3023Install on-site domestic wastewater treatment plants and disposal systems
  • CPCPFS3037Install residential life safety sprinkler systems
  • CPCPFS4021Commission domestic and residential fire suppression sprinkler systems
  • CPCPGS3053Disconnect and reconnect Type A gas appliances
  • CPCPGS4022Service Type A gas appliances
  • CPCPGS4023Install, commission and service Type B gas appliances
  • CPCPMS4022Commission air and water systems
  • CPCPWT3022Install and commission water heating systems and adjust controls and devices
  • CPCPWT3027Install backflow prevention devices
  • CPCPWT4022Commission and maintain backflow prevention devices
  • CPCPWT4023Commission and maintain hot and heated water temperature control devices
  • UEERL0004Disconnect-reconnect electrical equipment connected to low voltage (LV) installation wiring

Source: National Training Register (training.gov.au). Unit lists and rules are set by the training package and may change with new releases.

Entry requirements

Entry requirements vary by qualification. Send an enquiry and we'll confirm exactly what applies to you before you enrol.

Delivery & duration

Flexible delivery designed around working tradespeople. Your expected timeframe is confirmed with your quote — and if you're already experienced, RPL can shorten it significantly.

Fees

Enquire for a quote.

Career outcomes

  • Licensed plumber (subject to state requirements)
  • Plumbing contractor

RPL pathway

Already experienced in this trade? You may be able to gain this qualification through Recognition of Prior Learning — often faster than studying it. Check your eligibility.

Nationally Recognised Training logo

Nationally recognised qualifications delivered by Teach International Pty Ltd, RTO 31165.

Ready to get started?

Send an enquiry and we'll come back to you with a tailored quote.

Call UsEnquire Now

We use analytics cookies to understand how the site is used and improve it. See our Privacy Policy.