
Certificate III in Plumbing
Become a qualified plumber.
Overview
The core trade qualification for plumbers, covering water supply, sanitary, drainage, and related services across residential and commercial work — commonly used toward plumbing licensing.
Delivered and assessed by Teach International (RTO 31165), a nationally regulated Registered Training Organisation since 2005.
Who it's for
Apprentice and working plumbers pursuing a recognised trade qualification.
Units of competency & packaging rules
To achieve this qualification, competency must be demonstrated in:
- 58 units of competency
- 43 core units
- 15 elective units
Stream offered: General Plumbing
43 core units of competency
- CPCCCM2012Work safely at heights
- CPCPCM2039Carry out interactive workplace communication
- CPCPCM2040Read plans, calculate quantities and mark out materials
- CPCPCM2041Work effectively in the plumbing services sector
- CPCPCM2043Carry out WHS requirements
- CPCPCM2045Handle and store plumbing materials
- CPCPCM2046Use plumbing hand and power tools
- CPCPCM2047Carry out levelling
- CPCPCM2048Cut and join sheet metal
- CPCPCM2054Carry out simple concreting and rendering
- CPCPCM2055Work safely on roofs
- CPCPCM3021Flash penetrations through roofs and walls
- CPCPCM3022Weld polymer pipes using fusion method
- CPCPCM3023Fabricate and install non-ferrous pressure piping
- CPCPCM3024Prepare simple drawings
- CPCPCM3025Install trench support
- CPCPDR2021Locate and clear blockages
- CPCPDR2025Install stormwater and sub-soil drainage systems and drain work site
- CPCPDR2026Install prefabricated inspection openings and inspection chambers
- CPCPDR3021Plan layout and install below ground sanitary drainage systems
- CPCPDR3023Install on-site domestic wastewater treatment plants and disposal systems
- CPCPFS3031Fabricate and install fire hydrant and hose reel systems
- CPCPGS3048Install gas pressure control equipment
- CPCPGS3049Install gas appliance flues
- CPCPGS3051Purge consumer piping
- CPCPGS3053Disconnect and reconnect Type A gas appliances
- CPCPGS3054Calculate and install natural ventilation for Type A gas appliances
- CPCPGS3056Size and install consumer gas piping systems
- CPCPGS3059Install LPG storage of aggregate storage capacity up to 500 litres
- CPCPGS3061Install and commission Type A gas appliances
- CPCPSN3011Plan the layout of a residential sanitary plumbing system and fabricate and install sanitary stacks
- CPCPSN3022Install discharge pipes
- CPCPWT3020Connect and install storage tanks to a domestic water supply
- CPCPWT3021Set out and install water services
- CPCPWT3022Install and commission water heating systems and adjust controls and devices
- CPCPWT3025Install water pumpsets
- CPCPWT3026Install and fit off sanitary fixtures, water services and adjust water service controls
- CPCPWT3027Install backflow prevention devices
- CPCPRF2023Collect and store roof water
- CPCPRF3022Fabricate and install roof drainage systems
- CPCPRF3023Fabricate and install external flashings
- CPCPRF3024Install roof components
- HLTAID011Provide First Aid
15 elective units of competency
- CPCCCM2008Erect and dismantle restricted height scaffolding
- CPCCCM3001Operate elevated work platforms up to 11 metres
- MEM13015Work safely and effectively in manufacturing and engineering
- MEM11011Undertake manual handling
- MEM16006Organise and communicate information
- CPCPIG2021Design domestic urban irrigation systems
- CPCPIG3021Set out, install and commission irrigation systems
- CPCPIG3022Install and commission domestic irrigation pumps
- CPCCWHS2001Apply WHS requirements, policies and procedures in the construction industry
- CPCPGS3052Maintain Type A gas appliances
- CPCPGS3055Install gas sub-meters
- CPCPGS3060Install LPG storage of aggregate storage capacity exceeding 500 litres and less than 8 kl
- CPCPDR3025Plan layout and install vacuum drainage systems
- CPCPSN3025Install pre-treatment facilities
- CPCPSN3026Install sewerage pumpsets
Full training package rules and all permitted electives
Training package rules
- To be awarded this qualification, competency in one of the four occupational options must be achieved.
- OPTION 1: General Plumbing
- For the award of the Certificate III in Plumbing (General Plumber) a minimum of 58 units are to be completed as follows:
- 43 core units
- 15 elective units
- Electives are to be selected as followed:
- 8 units from Group A and
- 4 units from Group B and
- 3 units from Group C
- Up to 4 elective units may be replaced by units from any other group or from any relevant nationally endorsed Training Package or accredited course. The units must contribute to the vocational outcomes of the qualification.
- OPTION 2: General Plumbing – Roofing
- For the award of the Certificate III in Plumbing (General Plumber and Roofing) a minimum of 62 units are to be completed as follows:
- 43 core units
- 19 elective units.
- Electives are to be selected as followed:
- 8 units from Group A and
- 4 units from Group B and
- 3 units from Group C and
- 4 units from Group D
- Up to 4 elective units may be replaced by units from any other group or from any relevant nationally endorsed Training Package or accredited course. The units must contribute to the vocational outcomes of the qualification.
- OPTION 3: General Plumbing – Mechanical
- For the award of the Certificate III in Plumbing (General Plumbing and Mechanical) a minimum of 73 units are to be completed as follows:
- 43 core units
- 30 electives
- Electives are to be selected as followed:
- 8 units from Group A and
- 4 units from Group B and
- 3 units from Group C and
- 7 units from Group E and
- 8 units from Group F
- Up to 4 elective units may be replaced by units from any other group or from any relevant nationally endorsed Training Package or accredited course. The units must contribute to the vocational outcomes of the qualification.
- OPTION 4: General Plumbing – Roofing and Mechanical
- For the award of the Certificate III in Plumbing (General Plumber Roofing and Mechanical) a minimum of 77 units are to be completed as follows:
- 43 core units
- 34 electives
- Electives are to be selected as followed:
- 8 units from Group A and
- 4 units from Group B and
- 3 units from Group C and
- 4 units from Group D and
- 7 units from Group E and
- 8 units from Group F
- Up to 4 elective units may be replaced by units from any other group or from any relevant nationally endorsed Training Package or accredited course. The units must contribute to the vocational outcomes of the qualification.
Core units(43 units)
- CPCCCM2012Work safely at heights
- CPCPCM2039Carry out interactive workplace communication
- CPCPCM2040Read plans, calculate quantities and mark out materials
- CPCPCM2041Work effectively in the plumbing services sector
- CPCPCM2043Carry out WHS requirements
- CPCPCM2045Handle and store plumbing materials
- CPCPCM2046Use plumbing hand and power tools
- CPCPCM2047Carry out levelling
- CPCPCM2048Cut and join sheet metal
- CPCPCM2054Carry out simple concreting and rendering
- CPCPCM2055Work safely on roofs
- CPCPCM3021Flash penetrations through roofs and walls
- CPCPCM3022Weld polymer pipes using fusion method
- CPCPCM3023Fabricate and install non-ferrous pressure piping
- CPCPCM3024Prepare simple drawings
- CPCPCM3025Install trench support
- CPCPDR2021Locate and clear blockages
- CPCPDR2025Install stormwater and sub-soil drainage systems and drain work site
- CPCPDR2026Install prefabricated inspection openings and inspection chambers
- CPCPDR3021Plan layout and install below ground sanitary drainage systems
- CPCPDR3023Install on-site domestic wastewater treatment plants and disposal systems
- CPCPFS3031Fabricate and install fire hydrant and hose reel systems
- CPCPGS3048Install gas pressure control equipment
- CPCPGS3049Install gas appliance flues
- CPCPGS3051Purge consumer piping
- CPCPGS3053Disconnect and reconnect Type A gas appliances
- CPCPGS3054Calculate and install natural ventilation for Type A gas appliances
- CPCPGS3056Size and install consumer gas piping systems
- CPCPGS3059Install LPG storage of aggregate storage capacity up to 500 litres
- CPCPGS3061Install and commission Type A gas appliances
- CPCPSN3011Plan the layout of a residential sanitary plumbing system and fabricate and install sanitary stacks
- CPCPSN3022Install discharge pipes
- CPCPWT3020Connect and install storage tanks to a domestic water supply
- CPCPWT3021Set out and install water services
- CPCPWT3022Install and commission water heating systems and adjust controls and devices
- CPCPWT3025Install water pumpsets
- CPCPWT3026Install and fit off sanitary fixtures, water services and adjust water service controls
- CPCPWT3027Install backflow prevention devices
- CPCPRF2023Collect and store roof water
- CPCPRF3022Fabricate and install roof drainage systems
- CPCPRF3023Fabricate and install external flashings
- CPCPRF3024Install roof components
- HLTAID011Provide First Aid
Group A(20 units)
- CPCCCM2008Erect and dismantle restricted height scaffolding
- CPCCCM3001Operate elevated work platforms up to 11 metres
- CPCPCM2049Cut using oxy-acetylene equipment
- CPCPCM2052Weld mild steel using oxy-acetylene equipment
- CPCPFS3037Install residential life safety sprinkler systems
- CPCPFS3038Test and maintain fire hydrant and hose reel installations
- CPCPGS3026Assess operational risk when working with hydrogen
- CPCPIG2021Design domestic urban irrigation systems
- CPCPIG3021Set out, install and commission irrigation systems
- CPCPIG3022Install and commission domestic irrigation pumps
- CPCPWT3024Install and maintain domestic water treatment equipment
- CPCPWT3028Install property service
- CPCPWT3029Install water pipe systems
- CPCPWT3030Install home fire sprinkler systems
- MEM11011Undertake manual handling
- MEM13015Work safely and effectively in manufacturing and engineering
- MEM16006Organise and communicate information
- MEM05049Perform routine gas tungsten arc welding
- MEM05050Perform routine gas metal arc welding
- RIIWHS202Enter and work in confined spaces
Group B(6 units)
- CPCPCM2053Weld using metal arc welding equipment
- CPCPGS3046Install LPG systems in caravans, mobile homes and mobile workplaces
- CPCPGS3052Maintain Type A gas appliances
- CPCPGS3055Install gas sub-meters
- CPCPGS3060Install LPG storage of aggregate storage capacity exceeding 500 litres and less than 8 kl
- CPCPGS3047Install LPG systems in marine craft
Group C(5 units)
- CPCPDR3025Plan layout and install vacuum drainage systems
- CPCPSN3025Install pre-treatment facilities
- CPCPSN3026Install sewerage pumpsets
- RIIWHS202Enter and work in confined spaces
- RIICTT306EInstall cure in-place linings for existing pipeline systems
Group D(8 units)
- CPCCCM2008Erect and dismantle restricted height scaffolding
- CPCCCM3001Operate elevated work platforms up to 11 metres
- CPCPRF2022Select and install roof sheeting and wall cladding
- CPCPRF2024Fabricate roof coverings for curved structures
- CPCPRF3021Receive roofing materials
- CPCPRF3025Install roof coverings to curved roof structures
- CPCPRF3026Install roof sheets, wall cladding and complex flashings
- CPCPRF3027Select and install a heritage roof system
Group E(7 units)
- CPCPMS2021Assemble mechanical services components
- CPCPMS3031Fabricate and install steel pressure piping
- CPCPMS3032Select and fit insulation and sheathing
- CPCPMS3035Install and test ducting systems
- CPCPMS3036Install air handling units
- CPCPMS3038Install air conditioning control equipment
- CPCPMS3039Maintain mechanical services equipment
Group F(14 units)
- CPCCCM2008Erect and dismantle restricted height scaffolding
- CPCCCM3001Operate elevated work platforms up to 11 metres
- CPCCWC2001Complete penetrations and flashings
- CPCCWHS2001Apply WHS requirements, policies and procedures in the construction industry
- CPCPCM2053Weld using metal arc welding equipment
- CPCPMS3033Install small bore heating systems
- CPCPMS3034Install and test medical gas pipeline systems
- CPCPMS3037Install and commission a single head split system air conditioning
- CPCPMS3040Install and commission evaporative air cooling systems
- CPCPMS3041Install domestic solid fuel burning appliances
- UEECD0007Apply work health and safety regulations, codes and practices in the workplace
- UEERA0049Install and start up single head split air conditioning and water heating heat pump systems
- UEERA0059Prepare and connect refrigerant tubing and fittings
- UEERA0064Recover, pressure test, evacuate, charge and leak test refrigerants - split systems
Source: National Training Register (training.gov.au). Unit lists and rules are set by the training package and may change with new releases.
Entry requirements
Entry requirements vary by qualification. Send an enquiry and we'll confirm exactly what applies to you before you enrol.
Delivery & duration
Flexible delivery designed around working tradespeople. Your expected timeframe is confirmed with your quote — and if you're already experienced, RPL can shorten it significantly.
Fees
Enquire for a quote.
Career outcomes
- Plumber (subject to state licensing)
- Plumbing tradesperson
RPL pathway
Already experienced in this trade? You may be able to gain this qualification through Recognition of Prior Learning — often faster than studying it. Check your eligibility.
Nationally recognised qualifications delivered by Teach International Pty Ltd, RTO 31165.
Ready to get started?
Send an enquiry and we'll come back to you with a tailored quote.